How to turn off flash on instax mini 9? Tips for device settings


The Fujifilm Instax Mini 9 is the perfect camera for capturing memories. From selfies to landscapes, this easy-to-use instant camera prints stunning photos on the spot. With its stylish and compact design, you can take this camera with you everywhere and snap away at any moment!

In this article, we will consider many questions about the operation of the camera, as well as learn how to turn off flash on instax mini 9.

How do i set up my instant camera Instax Mini 9?

Before you can start shooting, you’ll need to make sure your Instax Mini 9 is properly loaded and set up.

Insert batteries

Open the battery lid located near the lens on the side of the camera and insert the batteries. You’ll need two AA alkaline batteries, which can easily be found at many stores or online.

how to turn off flash on instax mini 9

Insert the film cartridge

Carefully insert the Instax Mini Film into the Instax Mini 9 camera. Make sure the yellow mark on both the camera and cartridge are aligned when inserting the film. The film side should be inserted facing down, with the colored backing towards you. Once you have securely inserted the film in to place, close the film pack window. You will see a confirmation within seconds, as the camera will automatically start to eject the protective cover sheet. Once you have ejected this sheet, your Instax Mini 9 camera is ready for use!


Note: Do not expose the Instax Mini Film to direct sunlight, or near any other sources of heat. Doing so may cause the film image to be distorted and discolored when printed. Please store the film at room temperatureconfirm there is film present.

Turning the Camera Instax Mini 9

When turning on the camera, the user can also see a red light near the viewfinder on the back of the camera. This light will flash until the flash is fully charged and ready to take a picture. It is important to make sure you are using fresh batteries for optimal performance, as this will ensure that your flash charges quickly and efficiently. Once the flash is charged and ready, the light will no longer flash and instead turn solid red indicating that a photo can now be taken.

At this point, you can take a picture by pressing the shutter button located on top of the camera. After pressing it, the lens will automatically retract slightly to adjust for focus before taking the picture. After the photo is taken, the lens will retract and you will hear a gentle hum as the flash recharges for your next shot.

Why is the first slide of the movie dark?

The darkslide is an essential part of proper film camera use, as it helps to protect the film from light exposure while it is inside the camera. When a new cartridge of film is loaded into the camera and the power is turned on, the film counter will read “S”, indicating that film is present and ready to be used. To eject the darkslide, press the shutter button and the film counter will read “10”, meaning that your camera is now ready to take images. It’s important to remember to always use the darkslide when loading a new cartridge of film into your camera, as this will help keep your shots clear and undamaged.

What film does the Instax Mini 9 Use?

The Instax Mini 9 uses Fujifilm’s Instax Mini Instant film which is the smallest of the Instax instant film made by FujiFilm. At 3.33 x 2.13 inches, Instax Mini film is perfect for capturing small moments that can be shared with friends and family. The Instax Mini film is also the most affordable of the Instax films, costing around $.95 USD per sheet on


Taking pictures with the Instax Mini 9 is a fun and easy way to capture special moments. To take a good picture, follow these steps:

Shooting Photos

1. Press the shutter button located below the viewfinder on the front of the camera to take an image.

2. The film will eject from the camera and the film counter window will go down by one. Make sure to wait until the film has fully ejected before pulling it completely out of the camera.

3. The film will take around 90 seconds to fully develop, so keep the film facedown in direct sun to ensure the best results.

4. After not taking photos of an image, press the extended lens back into the camera until it clicks to turn off the camera.

Flash on instax mini 9

The Fujifilm Instax Mini 9 is an excellent camera for capturing special moments, both indoors and outdoors. Its built-in flash helps to ensure that your photos come out with quality and clarity in any situation. When used indoors, the flash will help to light up the scene and reduce any unwanted shadows that come from low light. Outdoors, the flash will help you bring out details in a contrasty scene, such as lighting up someone’s face who is standing in the shade. The built-in flash on the Fujifilm Instax Mini 9 helps to make taking pictures easy and enjoyable!

How to turn off flash on instax mini 9?

The flash in the Instax Mini 9 camera is an auto setting, so flash cannot be turned off. When using the Instax Mini 9, many users may find that the auto-flash feature is undesirable. This is especially true when taking pictures towards a mirror, as the flash will often cause overexposure and render the photo unusable.

Thankfully, there is an easy solution to this issue. By simply covering the flash with a small piece of black tape, you can effectively turn off the auto-flash setting. This will allow you to take pictures with no flash, resulting in better-quality photos.

Recommended exposure settings on fujifilm instax cameras

The Instax Mini 9 camera is a great choice for capturing quality photos in any environment. It comes with a built-in exposure dial which makes it easy to adjust the settings to get the desired results.

The camera is set to the house exposure by default, which is perfect for indoor and low-light situations. With just a few clicks you can switch between three exposure modes – Sunny, Slightly Cloudy, and Bright. The Sunny, Slightly Cloudy mode is a great starting point for those who are not familiar with the Instax Mini 9, but it is important to note that each environment and lighting condition may require you to adjust the settings. Finally, the Hi-Key setting is perfect for low-light photography and taking portraits – a feature that isn’t indicated by an orange.


So take some time to experiment and find out which setting produces the best results for your photos!

How to get great photos with Instax Mini 9?

Firstly, it’s important to remember that the Instax Mini 9 has a wide-angle lens which means most of your shots will be much better if you shoot in landscape mode. Simply rotate your camera 90 degrees before taking a photo and you’ll get the good pictures.

Black and white photos

Another great option for instant cameras is to try using Instax monochrome film, as this will give you more of a classic black and white look reminiscent of the old-style instant cameras.


Indoor photos

it is important to consider the lighting of the room when taking the photo. If you are in a well-lit room, then this should not be an issue, as the camera will adjust accordingly. However , if the room is not well-lit, then you may want to consider turning the camera dial to “HI-KEY” mode as this will increase the exposure of the photo.

Outdoor photos

When shooting outdoors it’s important not to use the “hi-key” mode as this will cause your photo to be over-exposed. Instead, try using the double exposure feature to take creative photos by combining two separate shots.

How to take landscape photos on the Instax Mini 9?

The Fujifilm Instax Mini 9 is an ideal camera for capturing stunning landscape photos. With its easy-to-use point-and-shoot design, you’ll be able to capture stunning scenes in no time. To switch the camera into landscape mode all you need to do is rotate the camera 90 degrees. This will help you capture a wider field of view and allow you to take advantage of the Mini 9’s impressive macro capabilities.

Can I turn on the timer on Instax Mini 9?

No, unfortunately, the Instax Mini 9 does not come with a timer. However, due to the lack of a timer, it can be difficult to get everyone in the frame for group shots.

If you need a timer camera, check out the Instax Mini 70 or Instax Mini 90.

Additional tips when using Instax Mini 9

Carefully insert the film into the camera instax mini 9

When using an instant camera, it is important to take caution not to open the film in direct sunlight. Doing so can cause light streaks and even ruin the film. It is best to load your film in a shaded area, under something that will block out direct sunlight such as a jacket or a shirt, wait for cloudy weather, or find a room with no windows and turn the lights off. This way you can ensure that your Instax images develop well and you won’t have to worry about any issues caused by exposing the film directly to sunlight.

Limited flash range instax mini 9

The flash range is only 8.8 feet (2.7 meters). This means that anything further than this distance will not be illuminated by the flash. Therefore, it is important to keep this limitation in mind when shooting in low light conditions, such as at night or indoors.

Minimum focus distance

The minimum focusing distance is 0.6 m from the camera. This can make it difficult to shoot close-ups, especially when trying to take selfies. Luckily, the Instax Mini 9 comes with a close-up focus adapter that attaches to the front of the lens, allowing you to increase the focus distance from 35cm to 50cm. This makes it much easier to capture in-focus selfies.

Leave the holes on the front of the camera open

When taking an image with the Instax Mini 9 camera, it is important to make sure that the two small holes located near the camera flash are not covered. If these holes are blocked, the resulting image may be either completely dark or completely white. To prevent this from happening, make sure that these holes are not blocked when taking the photo.

The lights on your camera are flashing

The Fujifilm Instax Mini 9 is a comes with a built-in flash, however, it’s important to understand why the flash light may blink. When you first turn on your camera, the front light will blink orange or red, which simply indicates that the flash is charging. Once the charge is complete, it will stop blinking and remain on.

Having problems with your Instax Mini 9 camera?

1. What to do if the Instax Mini 9 won’t turn on?

If the camera isn’t turning on, there are a few things to check. First, make sure the power switch is in the on position (located at the bottom right of the front of the camera). If it is, then look for a small blinking LED light next to the viewfinder. This light should be lit if the camera is powered on, so if it isn’t lit then you know there’s a power issue. Additionally, if the brightness indicators around the lens barrel on the front of the camera do not light up when you press the power button, then you know that the power is not reaching the camera.

The most common cause of Instax mini camera failure is dead batteries. If you have tried replacing the new batteries and your Instax Mini 9 camera still will not power on, it is possible that some kind of internal damage has occurred and you may need to take it to a repair shop. If the camera was dropped on a hard surface or in water, this could have caused internal damage that may require professional repair. If your camera has been exposed to large amounts of moisture, it is possible that the corrosion resistance feature that is built into the camera has been compromised and caused it to no longer turn on.

How to solve the problem if the Instax Mini 9 does not turn on?

When replacing batteries batteries in the Fujifilm Instax Mini 9 camera, it is important to use two fresh AA Alkaline batteries for the best exposures and results with your camera. Loading batteries in the correct orientation is key for proper functioning of the device. Make sure to match the “+” and “-” symbols on the batteries with those on the camera. If you are uncertain how to load the batteries correctly, please refer to this article for more detailed instructions.

If your Fujifilm camera still won’t turn on, the only way to get your camera back to working order is to contact a Fujifilm repair center.

2. Why did the Instax Mini 9 camera start flashing orange?

If all of the brightness indicators on the front of your Instax Mini 9 are blinking orange, it is likely that one of several issues is occurring with your camera.

maxresdefault 1

Dead batteries need to be replaced

The first possible issue is that the batteries in the camera are too low and need to be replaced. If this is the case, simply remove the old batteries and replace them with new ones.

The film was inserted incorrectly on the Instax Mini 9

The second possible issue is that the film was not loaded correctly. Check to make sure that the film was inserted properly and is not stuck in any part of the camera.

Paper jam problem inside the Instax Mini 9

The third possible issue is that there is a paper jam inside of the camera. If this is the case, you’ll need to open up the camera and remove any obstructions that may be causing the jam. Make sure to use proper caution when opening up the camera, as improper handling can damage your Instax Mini 9.

3. Why did the Instax Mini 9 camera start blinking red?

One important feature on the back of the camera is the small light to the left of the viewfinder, called the flash charging lamp. This light serves as a helpful indicator to let you know when the flash is ready to be used. The lamp may blink or stay red, which indicates that it’s not yet ready to fire.

How to fix red light flashing issue on Instax Mini 9?

Fortunately, this problem can be easily solved by replacing the dead batteries with 2 new AA alkaline batteries.

4. Why are all the lights blinking on my Instax Mini 9?

Batteries are exhausted on Instax Mini 9

When the batteries start to run low, the red light next to the viewfinder on the back of the camera will light up. This is an indication that you should replace the batteries as soon as possible. If you don’t replace them in time, all the lights on the camera may blink and your pictures might not be saved. To replace the batteries, you must do so while the lens is extended and the camera is turned on. After replacing the batteries, make sure to turn the camera off and wait for a few seconds before turning it back on.

Film not loaded correctly on instax mini 9

To check, look at the film window on the back of the camera next to the viewfinder and see if there is a large yellow mark on the film packet. If there is not, it may have been loaded in upside down. In this case, you can open the camera back and reload the film correctly. Be sure to close the back of the camera securely before taking any more photos.

Once the back of the camera is secured, it is important to note that you must shoot all the film before reopening and reloading it. Otherwise, the film may turn all white. To do this, make sure the shooting mode is set to “Auto” and shoot all of the film.

There is a paper jam inside the instax mini 9

When troubleshooting a Fujifilm camera, inserting fresh 2 AA alkaline batteries is typically the first step. If after inserting new batteries, the brightness indicators continue to lights blinking, it is likely that there is a paper jam. To reset the camera and fix the issue, remove the batteries, reinsert them, and press the shutter button once the camera is turned on. This should eject the stuck film.

5. Why does Instax Mini 9 print in white?

The Instax Mini 9 utilizes two small, parallel holes, or sensors, on the front of the camera to measure the amount of light in the environment. When these sensors are covered, the Instax Mini 9 will think there needs to be more light than it actually does, resulting in an overexposed image. To ensure proper exposure, make sure the sensors are not covered and that you have selected the correct brightness setting before taking a photo.

Film Was Exposed When Loading Into Camera or While on Instax Mini 9

Before inserting a cartridge into your camera, make sure that you have taken all the necessary precautions when choosing a medium for this. Avoid places with direct sunlight as this may prematurely expose the film before it is loaded into the camera.

The instax film was stored incorrectly and/or is expired

Unfortunately, if the film has expired or been improperly stored, you may find that your prints are coming out completely white. If this is happening to you, it’s important to check the expiration date on your film and make sure that it’s still good. If not, purchase some new Instax mini film and try again.

The Instax Mini 9 uses the high-quality Fujifilm Instax Mini film, which has a shelf life of up to 2 to 3 years.

Low temperature when using the Instax Mini 9

Fujifilm Instax film is designed to offer great results in a wide range of temperatures, however optimal results are achieved when the ambient temperature is between 41 – 104 F (or 5 – 40 C). When using the Instax Mini 9 camera and film in temperatures below 41 F (or 5 C), the Instax prints may not be able to develop correctly and will turn out completely white.

6. Why does Instax Mini 9 print in black?

If you take an image with your Instax Mini 9 and the resulting photo is completely black, there may be a few possible causes.


First, it is possible that the lens wasn’t fully extended when you turned the camera on or the camera lens barrel was held when the image was taken so the shutter wasn’t able to fire correctly. This can cause a ‘fully black’ image because no light has been able to reach the image.

Second, the Instax film may be expired or has been stored incorrectly, resulting in a black photo. Ensure that your Instax film has not expired or been stored in a temperature that is too high or too low.

Fourth, the brightness adjustment dial setting may be incorrect. Make sure to check that this is set correctly for the environment you are shooting in.

Third, if you are taking an image at night or in a dark environment, the subject may be too far away for the camera to pick up light. Additionally, if the flash is covered by any material, the image will not be able to show.

Lastly, it is possible that the camera miscalculated the exposure or has malfunctioned. If all other options have been ruled out, contact the manufacturer instax cameras to investigate further and determine if any repairs are needed.

7. Why did my Instax Mini 9 stop taking pictures and photos?

When using an Instax Mini camera, it is important to check the batteries and make sure they are sufficiently charged in order for the camera to function properly. If the batteries are too low or dead, then the camera will not be able to take a photo. Additionally, make sure that the flash is properly charging if it isn’t working.

The batteries must also be loaded correctly in order for the camera to take photos. If the batteries are not loaded correctly, then the camera will not be able to take a photo.

Also make sure that the instax mini camera is turned on. If the camera has remained idle for roughly 5 minutes with the power turned on, then it will not be able to take a photo.

Finally, check the film pack to make sure that it is properly loaded and that there is enough film in the camera. If any of these issues are present, then the camera will not be able to take a photo. Therefore, make sure that all of these elements are in proper working order before attempting to take a photo.


The Instax Mini 9 is a great camera for anyone who wants to start taking instant photos. With its simple design and easy-to-use controls, it’s perfect for someone just getting started with photography. With a bit of practice and patience you’ll be able to take great photos with your Instax Mini 9.

Read more: Instax Mini 9 troubleshooting – causes and best recommendations

How do I turn off the flash on my Instax Mini 9?

The flash in the Instax Mini 9 camera is an auto setting, so flash cannot be turned off. Thankfully, there is an easy solution to this issue. By simply covering the flash with a small piece of black tape, you can effectively turn off the auto-flash setting.

Can you use Instax Mini without flash?

The Stax Mini 90 series has revolutionized photography with its new bulb mode. This innovative mode allows photographers to capture stunning images without relying on a flash.

Why does my Instax Mini 9 keep flashing?

The orange lighting on the Instax Mini 9 is a warning that your camera’s batteries need to be replaced. Alkaline batteries are the recommended type to use for this camera, and they can be easily replaced while the camera is still in use.

How do I change settings on my Instax Mini 9?

To ensure that your photos come out looking their best, make sure to adjust the brightness setting. Once activated, the camera will automatically calculate what it deems to be the most appropriate brightness setting for your photo. If you would like a more dimly lit image, simply set the brightness on a dim setting.

Leave a Comment